How many years can the fish pond anti-seepage film be used?

　　Fish pond membrane is particularly suitable for situations where the soil cannot retain water. In some areas, sandy soil can fill a pool of water and leak out in a short period of time. In this case, using anti-seepage membrane has lower costs, faster construction, and more convenient maintenance compared to traditional anti-seepage foundations.

　　How many years can the fish pond anti-seepage film be used?

　　The fishpond membrane uses new polyethylene as the main raw material, and its service life is greatly extended by adding dual anti ultraviolet and anti-aging ingredients.

　　0.4-0.5mm is a commonly used specification for fish pond membranes. With reasonable use, the underground service life can reach over 20 years, and the exposed parts on slopes can be used for 6-10 years or more. The exposed parts on slopes can also be covered with geotextile, resulting in a longer service life.

　　How many years can the fish pond anti-seepage film be used?

　　The following is an introduction to the precautions for using fish pond membranes and how to lay them: In the renovation of new or old fish ponds, the bottom and slopes of the ponds should be cleaned thoroughly, such as small stones, tree roots, and reed roots. All of them should be cleaned, otherwise the membrane will be punctured by the pressure of the water over time.

　　Laying fish pond membrane is actually very simple, as long as the previous work is done well, laying it later will be much easier. After digging a pool, first compact and level the slope and bottom, with an area of over 2 acres.

　　Then we will measure the dimensions, including the bottom length, width, and slope length. I can help you calculate the dimensions, or you can calculate how many square films to use yourself.

　　The width of the fish pond membrane can be produced from 1 meter to 8 meters, with any length. After the membrane is laid, it is overlapped by 10-15 centimeters. The membrane is welded using a welding machine, and all membranes are welded into a whole to achieve better anti-seepage effect.